Autocad Hydraulic Schematic

admin

Inserting Hydraulic Schematic Symbols. Insert hydraulic components from the icon menu. The hydraulic symbol library in AutoCAD Electrical includes filters, valves, cylinders, pressure switches, motors, pumps, meters, restrictors, quick disconnects, flow arrows and more. The hydraulic symbol library consists of all the hydraulic symbols. Use the Project Manager to manage your hydraulic drawings. From here, you can create a drawing and modify any drawing properties. Create a new drawing Click Project tabProject Tools panelManager. Find If AEGS is not the active project, activate the AEGS project. If AEGS is in the list of open projects: Select AEGS and right-click. Click Activate. Oct 25, 2016  Many of you know that AutoCAD Electrical does a wonderful job assisting in the creation and modification of Electrical Controls schematics. But did you know it can also be used to produce Hydraulic, Pneumatic, and P&ID schematics, as well? The Extra Libraries toolbar has been available since before it was even AutoCAD Electrical and those three Icon Menus continue to be. Insert hydraulic components from the icon menu. The hydraulic symbol library in AutoCAD Electrical includes filters, valves, cylinders, pressure switches, motors, pumps, meters, restrictors, quick disconnects, flow arrows and more. The hydraulic symbol library consists of all the hydraulic symbols.

Use the Project Manager to manage your hydraulic drawings.

From here, you can create a drawing and modify any drawing properties.

Create a new drawing

  1. Click Project tabProject Tools panelManager. Find
  2. If AEGS is not the active project, activate the AEGS project.

    If AEGS is in the list of open projects:

    • Select AEGS and right-click.
    • Click Activate.

    If AEGS is not in the list of open projects:

    Survey

    • Select the project list drop-down.
    • Click Open Project.
    • On the Select Project File dialog box, navigate to and select the AEGS.WDP file.
    • Click Open.
  3. In the Project Manager, right-click the project name, and select Properties.
  4. In the Project Properties Project Settings dialog box, click Default to switch on all paths for pneumatic, hydraulic, and P&ID schematic libraries.
  5. Click OK.
  6. In the Project Manager, click the New Drawing tool.
  7. In the Create New Drawing dialog box, specify:

    Name: AEGS12

    Template:Mouse over the edit box to verify ACAD_Electrical.dwt is specified

    If ACAD_Electrical.dwt is not specified, click Browse. Select it from the list of available templates.

    Description 1: Hydraulic Example

    Click OK.

    Note: If you want to set the component, wire number, cross-reference, style, and drawing format settings, click OK-Properties to proceed to Drawing Properties dialog box.
  8. Enter DSETTINGS at the command prompt.
  9. In the Drafting Settings dialog box Snap and Grid tab, turn on Snap and Grid and set the size of both to 0.125.
  10. Click OK.
  11. Click Schematic tabOther Tools panelDrawing Properties. Find
  12. In the Drawing Properties dialog box Drawing Format tab, Scale section, make sure that the feature scale multiplier is set to 1.0 inch.
  13. Click OK.
    Note: For metric unit, the following settings are recommended so that the wire connection points are placed on the grids for easier drafting. Grid and Snap Size = 2.5 mm; Feature scale multiplier =20 (scale factor = 20).
Next topic:Inserting Hydraulic Schematic Symbols

Insert hydraulic components from the icon menu.

Autocad Schematic Symbols

The hydraulic symbol library in AutoCAD Electrical includes filters, valves, cylinders, pressure switches, motors, pumps, meters, restrictors, quick disconnects, flow arrows and more. The hydraulic symbol library consists of all the hydraulic symbols. It is found at UsersPublicDocumentsAutodeskAcade {version}Libshyd_iso125.

Insert hydraulic symbols

Autocad Electrical Hydraulic Schematic

  1. Click Schematic tabInsert Components panelInsert Hydraulic Components. Find
    Note: By default, an expanded panel closes automatically when you click another panel. To keep a panel expanded, click the push pin icon in the bottom-left corner of the expanded panel.
  2. In the Insert Component: Hydraulic Symbol dialog box, select the check box for Vertical.
  3. In the Insert Component: Hydraulic Symbol dialog box, click the General Valves icon.
  4. In the Hydraulic: General Valves dialog box, click Shut Off Valve Open.
  5. Respond to the prompts as follows:

    Specify insertion point:

    Select to place the valve in the upper left corner of your drawing

  6. In the Insert/Edit Component dialog box, specify:

    Component Tag: VAL2

    Click OK.

  7. Repeat steps 1 - 3.
  8. In the Hydraulic: General Valves dialog box, click Checkvalve Flow Left.
  9. Respond to the prompts as follows:

    Specify insertion point:

    Select to place the check valve below the shut off valve

  10. In the Insert/Edit Component dialog box, click OK.
  11. Click Schematic tabInsert Components panelInsert Hydraulic Components. Find
  12. In the Insert Component: Hydraulic Symbol dialog box, click Motors & Pumps.
  13. In the Hydraulic: Motors and Pumps dialog box, click Fixed Displacement.
  14. In the Hydraulic: Fixed Displacement dialog box, click Uni-Directional Pump.
  15. Respond to the prompts as follows:

    Specify insertion point: Select to place the pump below the check valve

  16. In the Insert/Edit Component dialog box, specify:

    Description: Line 1: Hydraulic Oil PumpPrinciples of marketing kotler download.

    Click OK.

  17. Insert another Shut Off Valve Open below the Hydraulic Oil Pump.
  18. Click Schematic tabInsert Components panelInsert Hydraulic Components. Find
  19. In the Insert Component: Hydraulic Symbol dialog box, click Filters.
  20. In the Hydraulic: Filters dialog box, click Filter.
  21. Respond to the prompts as follows:

    Specify insertion point: Select to place the filter below the shut off valve

  22. In the Insert/Edit Component dialog box, specify:

    Component Tag: FI2

    Description: Line 1: Filter

    Click OK.

  23. Click Schematic tabInsert Components panelInsert Hydraulic Components. Find
  24. In the Insert Component: Hydraulic Symbol dialog box, click Miscellaneous.
  25. In the Hydraulic: Miscellaneous dialog box, click Reservoir.
  26. Respond to the prompts as follows:

    Specify insertion point: Select to place the reservoir below the filter

  27. In the Insert/Edit Component dialog box, click OK.
Previous topic:Setting Up Hydraulic Drawings